RE: [Nolug] Slow NFS on GigE

Check the windows drivers. Find out the make of the gigabit chip, and get the latest drivers from that company's web site. (like broadcom) the gigabit drivers included with windows are often unusable, i've seen this same thing before.

-----Original Message-----
From: "Dustin Puryear" <dustin@puryear-it.com>
To: general@brlug.net; nolug@nolug.org
Sent: 4/4/08 2:08 PM
Subject: [Nolug] Slow NFS on GigE

I'm curious if anyone has had any performance issues with NFS over GigE?
  We are bringing up a pretty standard VMware scenario: VMware servers
are connected to GigE with bonded pair and our Dell NF500 NAS is running
RAID10. Fast and easy. Only..

The NFS performance sucks. I need to get some firm numbers, but it looks
like we can't get NFS to perform better than if it were on a Fast
Ethernet network. That said, if we change over to mounting our VM
filesystem using CIFS we can scream at pretty much wire speeds. (By the
way, if using CentOS 5.0 and mount.cifs, upgrade to 5.1 because the 5.0
kernel will panic sometimes with a mounted CIFS in high usage.)

Here's out setup:

2 Dell 1850's CentOS 5.1 with Intel GigE cards (2 cards each, 2 ports
per card, 1 card = bonded pair = VMware Network, 1 card = 1 port = Admin
Network)

1 Dell NF500 running Windows Storage Server 2003 with 4 disk RAID10 and GigE

Regardless of whether we use bonding/LAG (Dell PowerConnect 5000+) or
just simple GigE over one port, our NFS sucks it. CIFS screams though
and pretty much saturates the connection.

Right now I've tested Linux <--> NAS. When I have time I'll try Linux to
Linux.

-- 
Dustin Puryear
President and Sr. Consultant
Puryear Information Technology, LLC
225-706-8414 x112
http://www.puryear-it.com
Author, "Best Practices for Managing Linux and UNIX Servers"
   http://www.puryear-it.com/pubs/linux-unix-best-practices/
___________________
Nolug mailing list
nolug@nolug.org
___________________
Nolug mailing list
nolug@nolug.org