Ok folks,
I've got a really weird Trixbox related question for the list.
I've got a Trixbox 2.8 system setup in a VM and working. I got it to
connect to my SIP provider and can see that I'm registered on both sides
and I can receive inbound calls without issues - phone rings, audio is
fine, etc.
This is where it gets weird. When I make an outbound call to either a
985 or 504 telephone number, I have no audio - they can't hear me and I
can't hear them. However, if I make a phone call to a 1-800 number, it
works like a charm.
I've gone as far as setting up a sniffer on the WAN side of my Cisco
router and can see SIP packets in BOTH directions, so there doesn't seem
to be a problem with the SIP trunk.
I'm stumped. Anyone have any ideas on what I'm missing?
J
___________________
Nolug mailing list
nolug@nolug.org
Received on 06/20/10
This archive was generated by hypermail 2.2.0 : 06/20/10 EDT