RE: Re: [Nolug] "Can't activate eth0"

Alex McKenzie wrote on 2003/11/13 Thu PM 08:45:04 EST:
[snip]
Are the lights on the modem blinking? If you have line sync (light
steady on) then the problem is in the computerl, and therefore, yours.
If you don't have line sync (blinking light), the problem is theirs and
call tech support, complain that you've called before, and you've
already rebooted and reinstalled your software, and that you can't get
line sync. This should bring you to a tech who will offer to have the
line tested.

--
Alex McKenzie     alex@boxchain.com     http://www.boxchain.com
___________________
Nolug mailing list
nolug@nolug.org
============================================================
When I'm not trying to connect, the pwr, dsl and enet lights are on all the
time. When I click "activate" the dsl and enet lights flash, but not
rapidly.
___________________
Nolug mailing list
nolug@nolug.org
default is 192.168.1.1
Sounds like your modem has been lobotomized, or your circuit is dead between
residence and main office.
___________________
Nolug mailing list
nolug@nolug.org