[Nolug] more alsa

>Andrew S. Johnson wrote:

Note: /etc/modules.conf is more recent than /lib/modules/2.4.20/modules.dep

>
>This tells you that you need to depmod -a after you make install the
>alsa drivers
>and have edited the modules.conf file accordingly.

this is the output of depmod -a, except, none of those have to do with
my alsa driver ( I think)

depmod: *** Unresolved symbols in
/lib/modules/2.4.20/kernel/sound/isa/gus/snd-gus-synth.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20/kernel/sound/isa/sb/snd-emu8000-synth.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1-synth.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20/kernel/sound/pci/trident/snd-trident-synth.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20/kernel/sound/synth/emux/snd-emux-synth.o

/lib/modules/2.4.20/kernel/sound/acore/snd.o: invalid parameter
parm_snd_major
/lib/modules/2.4.20/kernel/sound/acore/snd.o: insmod
/lib/modules/2.4.20/kernel/sound/acore/snd.o failed

>Check your modules.conf file to make sure you have the right lines. >Use
>modinfo -p modulename to get a list of parameters. Maybe post your
>modules.conf file.

Here is the relevant part of /etc/modules.conf

#ALSA portion
alias char-major-116 snd
options snd snd_major=116 snd_cards_limit-1
alias snd-card-0 snd-card-intel8x0
        # OSS/Free portion
        alias char-major-14 soundcore
        alias sound-slot-0 snd-card-0
        alias sound-service-0-0 snd-mixer-oss
        alias sound-service-0-1 snd-seq-oss
        alias sound-service-0-3 snd-pcm-oss
        alias sound-service-0-8 snd-seq-oss
        alias sound-service-0-12 snd-pcm-oss

>
>Andy Johnson

output of dmesg is as follows.

Intel 810 + AC97 Audio, version 0.21, 00:45:09 Feb 2 2003
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 02:07.0
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0xe080 and 0xe400, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Primary codec not ready.

  It says that its sharing that irq with the ethernet and the usb
controller. Maybe this is the problem, if so, how do I change the
irq's. I will post more of the dmesg if it would help.

>my sound cards is intel810 audio built into the motherboard, and I
used >the directions from the alsa-project website. Any help would be
>appreciated.

-- 
Chris Bloch
(504) 669-1417
zaphodatsstardotcom
aolim : blochsound
___________________
Nolug mailing list
nolug@nolug.org