Re: [Nolug] camera card reader

From: James Scott <jhs_technical_at_cox.net>
Date: Thu, 26 Feb 2004 13:25:39 -0600
Message-Id: <1077823539.4083.9.camel@ip68-11-44-133.no.no.cox.net>

On Wed, 2004-02-25 at 20:32, Ron Johnson wrote:
> On Wed, 2004-02-25 at 13:54, James Scott wrote:
> > I am attempting to get a compact flash card reader up on fedora core 1.
> >
> > The Lexar Model: GS-UFD-20SA-TP
> > Shows up in the hardware browser as a "systems device" and identifies
> > itself as
> > "Carry Computer Eng., Co., Ltd SM/CF/PCMCIA Card Reader"
> > This is consistant with other references on the net. Most of them are
> > dated 2002 or earlier.
> > All of the info I am finding that is more recent says these things are
> > plug and play.
> >
> > A google search on the "Carry Computer Eng., Co., Ltd SM/CF/PCMCIA Card
> > Reader" gets me to pages concerning PCMCIA card readers and presents me
> > with the references the data that follows.
> >
> > This comes from:
> > #
> > # List of USB ID's
> > #
> > # Maintained by Vojtech Pavlik <vojtech@suse.cz>
> > # If you have any new entries, send them to the maintainer.
> > # The latest version can be obtained from
> > # http://www.linux-usb.org/usb.ids
> > #
> > # $Id: usb.ids,v 1.139 2004/02/14 00:12:57 dbrownell Exp $
> > #
> >
> > 07cc Carry Computer Eng., Co., Ltd
> > 0000 CF Card Reader
> > 0003 SM Card Reader
> > 0004 SM/CF/PCMCIA Card Reader
> > 0006 SM/CF/PCMCIA Card Reader
> > 000c SM/CF Card Reader
> > 000d SM/CF Card Reader
> > 0200 6-in-1 Card Reader
> >
> > I am clueless where to go from here.
>
> In addition to what Manuel and Andrew have said, ensure that these
> modules are either loaded or compiled in:
> usb-storage
> scsi_mod
> sg
> sd_mod
I found that usb-storage and sd_mod are not loaded.
Did insmod on both but am unsure how to make the change permanent.

> Here's my entries in /etc/fstab :
> /dev/sda1 /hot/usb/CF vfat rw,suid,dev,exec,noatime,noauto,user,async 0
> 2
> /dev/sdb1 /hot/usb/SD vfat rw,suid,dev,exec,noatime,noauto,user,async 0
> 2
>
> After you stick in the card, you'll have to run rescan-scsi-bus.sh
> as root, to tell the SCSI sub-system about the card.
OK
>
> You'll also need the hot-plug packages installed.
Do you know what there are?

___________________
Nolug mailing list
nolug@nolug.org
Received on 02/26/04

This archive was generated by hypermail 2.2.0 : 12/19/08 EST