Jonathan Schwehm wrote:
> Did you mistype the ip address in your posting? Otherwise, it could
> just be that you transposed some numbers in your IP address when
> trying to connect, instead of using 192.168.254.254. What's the
> default IP address for the speedstream? Maybe resetting it to factory
> default settings and try to configure from scratch would help.
>
> Jonathan
>
> John D. Tiedeman wrote:
>
>> I'm trying to replace my DI-604, which is has mechanical (case)
>> problem. When I enter http://198.162.254.254 in either browser in my
>> Linux box, I get a message that it can't connect (all applicable
>> lights on the 2614 are on). My ancient OmniBook 800CT with W95 and
>> Firefox will sometimes connect, but since I looked up the default
>> password for the 2614 I can't get the 800CT to do anything when I
>> enter the above URL. Going back to the DI-604 both machines connect
>> fine as long as I take pains that the cable from the ethernet bridge
>> stays plugged in (there is nothing for it to catch on in the DI-604).
>> When the OmniBook will connect, I get a SpeedStream login screen. Why
>> not with the Linux box?
>> ___________________
>> Nolug mailing list
>
That's the number given in the Quick-Start Guide. I pressed the reset
button in case the short-term owner had entered a password, so
everything should be back at default now.
___________________
Nolug mailing list
nolug@nolug.org
Received on 10/06/04
This archive was generated by hypermail 2.2.0 : 12/19/08 EST